Using Artifactory 6.x ?
JFrog Artifactory 6.x User Guide
Have a question? Want to report an issue? Contact JFrog support
All Artifactory configuration files are located under the
On Linux, Solaris and MacOS
$ARTIFACTORY_HOME is usually a soft link to
Global Configuration Descriptor
The global Artifactory configuration file is used to provide a default set of configuration parameters.
The file is located in
$ARTIFACTORY_HOME/etc/artifactory.config.xml and is loaded by Artifactory at initial startup. Once the file is loaded, Artifactory renames it to
xml and from that point on, the configuration is stored internally in Artifactory's storage. This ensures Artifactory's configuration and data are coherently stored in one place making it easier to back up and move Artifactory when using direct database backups. On every startup, Artifactory also writes its current configuration to
$ARTIFACTORY_HOME/etc/artifactory.config.startup.xml as a backup.
At any time, the default configuration can be changed in the Artifactory UI Admin module.
There are two ways to directly modify the Global Configuration Descriptor:
Direct modification of the global configuration descriptor is an advanced feature, and if done incorrectly may render Artifactory in an undefined and unusable state. We strongly recommend backing up the configuration before making any direct changes, and taking great care when doing so.
Modifying Configuration Using the UI
You can access the Global Configuration Descriptor in the Admin module under Advanced | Config Descriptor. There you can modify the file's contents directly or copy the contents from the entry field.
Modifying Configuration Using the REST API
You can retrieve or set the global configuration by sending a GET or POST request to
http://<host>:<port>/artifactory/api/system/configuration. For example:
curl -u admin:password -X GET -H "Accept: application/xml" http://localhost:8080/artifactory/api/system/configuration curl -u admin:password -X POST -H "Content-type:application/xml" --data-binary @artifactory.config.xml http://localhost:8080/artifactory/api/system/configuration
Bootstrapping the Global Configuration
You can bootstrap Artifactory with a predefined global configuration by creating an
$ARTIFACTORY_HOME/etc/artifactory.config.import.xml file containing the Artifactory configuration descriptor.
If Artifactory detects this file at startup, it uses the information in the file to override its global configuration. This is useful if you want to copy the configuration to another instance of Artifactory.
Security Configuration Descriptor
There are two ways to directly modify the Security Configuration Descriptor:
Direct modification of the security descriptor is an advanced feature, and if done incorrectly may render Artifactory in an undefined and unusable state. We strongly recommend backing up the configuration before making any direct changes, and taking great care when doing so.
Modifying Security Using the UI
You can access the Security Configuration Descriptor in the Admin module under Advanced | Security Descriptor. There you can modify the file's contents directly or copy the contents from the entry field.
Modifying Security Using the REST API
You can retrieve or set the security configuration by sending a GET or POST request to
http://<host>:<port>/artifactory/api/system/security. For example:
curl -u admin:password -X GET -H "Accept: application/xml" http://localhost:8080/artifactory/api/system/security curl -u admin:password -X POST -H "Content-Type: application/xml" --data-binary @security.xml http://localhost:8080/artifactory/api/system/security
You must supply a user with Admin privileges to modify the security descriptor through the REST API
Bootstrapping the Security Configuration
Artifactory stores all security information as part of its internal storage.You can bootstrap Artifactory with a predefined security configuration by creating an
$ARTIFACTORY_HOME/etc/security.import.xml file containing the Artifactory exported security configuration information.
If Artifactory detects this file at startup, it uses the information in the file to override all security settings. This is useful if you want to copy the security configuration to another instance of Artifactory.
Content Type/MIME Type
Artifactory provides a flexible mechanism to manage content type/MIME Type. You can define system-wide MIME types for common usage, but you can also overwrite the MIME types for specific files as needed. The list of default MIME types can be found in in
$ARTIFACTORY_HOME/etc/mimetypes.xml and can be edited in order to add, remove or change MIME types. If a file has an extension that is not supported by any of the MIME types, or does not have an extension at all, Artifactory will use the default MIME type of
application/octet-stream. To determine an artifact's MIME type, Artifactory compares its extension with the those in the
mimetype.xml file, and applies the MIME type of the first extension that matches.
MIME Type Attributes
Each MIME type may have the following attributes:
|The MIME type unique name (mandatory)|
|A comma separated list of file extensions mapped to this MIME type (mandatory)|
|True if this MIME type should be indexed for archive searching (valid only for supported archive files)|
|True if this MIME type is a browsable archive|
|True if this MIME type can be viewed as a text file inside Artifactory UI|
|The UI highlighter syntax to for this MIME type (only relevant if this is a |
|The css class of a display icon for this mime type|
<mimetypes version="4"> <mimetype type="text/plain" extensions="txt, properties, mf, asc" viewable="true" syntax="plain"/> <mimetype type="text/html" extensions="htm, html" viewable="true" syntax="xml"/> <mimetype type="text/css" extensions="css" viewable="true" syntax="css"/> <mimetype type="text/xsl" extensions="xsl" viewable="true" syntax="xml"/> <mimetype type="text/xslt" extensions="xslt" viewable="true" syntax="xml"/> <mimetype type="text/x-java-source" extensions="java" viewable="true" syntax="java"/> <mimetype type="text/x-javafx-source" extensions="fx" viewable="true" syntax="javafx"/> </mimetypes>
For example, from the extensions parameter in the above
mimtypes.xml file sample we can conclude that:
application/octet-streamMIME type since "
doc" is not included in any of the other MIME types).
IMPORTANT: Make sure you restart Artifactory for your changes to take affect.
Artifactory MIME Types
mimetypes.xml (e.g. application/x-checksum)are used by Artifactory. Great care should be taken before changing these Mime-Types to ensure Artifactory continues to function correctly.
Setting Content-Type During Download
Using Artifactory, when downloading files you can override the
Content-Type HTTP header by setting the
artifactory.content-type property is not explicitly set, Artifactory will use the default mechanism of matching the artifact name extension to the extensions in the
mimtypes.xml file to apply the Content-Type.
This feature is only available with Artifactory Pro.
Rather than configuring properties in the JVM runtime configuration of the hosting container, you can edit
$ARTIFACTORY_HOME/etc/artifactory.system.properties file and restart Artifactory.
The Artifactory system properties are documented within this file.
Since these settings impact the entire container VM, we recommend using this feature primarily for specifying Artifactory-related properties only (such as changing the database used by Artifactory, etc.).
Setting properties in
artifactory.system.properties is an advanced feature and is typically not required.
Do not confuse these setting with those in the
$ARTIFACTORY_HOME/data/artifactory.properties file, which are for internal use.
Logging Configuration Files
Artifactory uses the Logback Framework to manage logging and lets you configure the verbosity of log files. For details please refer to Configuring Log Verbosity
Artifactory provides you with a
binarystore.xml file so that you can configure the specific storage solution used in your system. For details please refer to Configuring the Filestore.