Licenses are managed in the Administration module under Licenses | Licenses. You can upload individual licenses to JPD using the Licenses Management page.
You cannot attach a license from Mission Control 3.x to JFrog Platform.
License Bucket Management
Once you have your license bucket(s), you can add them and match them against their services.
Obtaining a License Bucket
Once your license bucket is created, you will receive an email with a link to a dedicated web page.
For additional information on how you can get your License Buckets, please contact JFrog sales:
This page will display your personalized bucket license information needed when adding your bucket, including the Bucket Identifier, Signed URL and Key.
ƒAdding a License Bucket
Matching the URL and Key: For more than one license bucket, make sure the URL and Key that you enter correspond to the same Bucket Identifier.
Bucket name and identifier are two different things: Don’t confuse the bucket Name with the Bucket Identifier. The bucket name is an arbitrary logical name you assign to the bucket. The identifier is a unique identifier assigned to the bucket by JFrog.
Go to the Administration module | Licenses| License Buckets, and click Add New Bucket.
Enter a Name for your bucket, an Offline Bucket File or Signed URL, the Key you received from your JFrog representative, and click Add Bucket.
Once the license bucket has been loaded to the JPD, you can attach licenses from it using JFrog CLI.
Viewing Bucket Information
A bucket report provides a variety of information on usage of licenses in the bucket. To view a bucket report, hover over a bucket and select View Report from the Actions drop down menu.
The total number of licenses in this bucket.
The identifier of this license bucket.
The expiry date for this license bucket.
Max. consumed licenses over time
The maximum number of licenses that were ever in use concurrently during the validity period of this bucket.
The additional buckets split from this original bucket.
The services attached to this license bucket.
Do you have enough or too many licenses in your bucket?
Max. Consumed Licenses shows you that highest number licenses you ever used during the validity period of this bucket. This is something to consider when you renew your JFrog Artifactory licenses.
Splitting a License Bucket
A license bucket can be split into any number of separate buckets that can be applied to multiple environments as needed.
This is useful for isolated environments that have disconnected networks, and each require a dedicated service. For example: separate environments for Development, Staging and Production. In this case you would split the bucket into additional sub-buckets that can be assigned to each service that's within each one of the environments in your organization.
To Split a bucket, select "Split" from the action drop down list.
Add the new bucket name and the number of licenses to assign to it.
Once the new bucket is created, it will be added below the original bucket with the same name, appended by a dash and an ordered number.
original bucket ID:
new bucket ID:
The newly created licenses bucket should be downloaded and uploaded to the JPD environment it is intended for.
To download the split license bucket, hover over the bucket and select Download Bucket and Copy Key from the from the Actions drop down menu.
To attach a license to a license bucket, select Attach License from the drop-down list.
Removing a License Bucket
To remove a license bucket, go to Administration module > License > License Buckets, hover over a specific bucket and select Delete from the Actions drop down.
Once the license bucket is removed, the services that were attached to it should be assigned to a new bucket.
To attach a license bucket, hover over the bucket and select Attach License from the Actions drop down menu.
A split bucket is intended to be applied to services in a separate environment. When applying licenses, split licenses should not be used.
The Attach License page displays the available and used licenses within the selected license bucket, and the online services.
You can attach as many licenses to an JPD cluster as needed.
Attaching additional licenses to your JPD cluster will allow you to dynamically scale it up on demand.
To set the number of licenses you would like to attach to each service, select the green check icon and click on Attach licenses. You can set the licenses to all services in bulk by selecting the uppermost green checkbox.
The "# Licenses to Attach" column initially displays the minimum number of licenses the specific service requires. You can increase this number according to the number of available licenses in your bucket. However, you cannot attach less licenses than this default number.
Automating License Buckets with CLI
Using license buckets and JFrog CLI, you can easily automate, and therefore greatly simplify, managing licenses for a large number of Artifactory services.
Using Mission Control CLI
JFrog CLI is a compact and smart client that provides a simple interface to JFrog Mission Control (through its REST API). It can be used by your automation environment for fully automated license management for all your Artifactory services through Mission Control. For details on downloading and installing JFrog CLI, please refer to the CLI for JFrog Mission Control.
While each Artifactory license can only activate one Artifactory service at a time, you are free to move any license around to different Artifactory services as long as the license remains valid. For example, you can temporarily attach a license from a bucket to an Artifactory service used for a specific development project. Once the project is complete and the Artifactory service is no longer needed, you can detach the license and return it to the bucket managed by Mission Control.
Deploying and Releasing Licenses
You can deploy or release licenses with the JFrog CLI.
The Deploying a License command deploys a license from the bucket specified and attaches it to the specified Artifactory service.
The Releasing a license command removes the specified license from the specified Artifactory service and returns it to the specified bucket in JFrog Mission Control.
A license always belongs to the same bucket
When you release a license, it is always returned to the same bucket it was attached from.
License Management for an Individual Artifactory or Artifactory Edge
To apply licenses to a single JPD instance use the following steps:
1. Add a new bucket
2. Select Edit service for an existing Artifactory or Edge service
3. In the credentials section, enter username/password and select Test Connectivity. If the connectivity test succeeds, the dropdown for bucket selection is enabled.
4. Choose the new bucket from the list and select Save.
The JPD will determine the number of licenses the selected Artifactory/Edge instance requires and deploys that many licenses. If the existing licenses have better expiry than the selected bucket, then no action is taken.
Note: For Artifactory and Artifactory Edge services, buckets of both types are available for selection. This allows you to switch an Artifactory to Artifactory Edge or vice versa.