The Pipeline Run Logs view can be invoked from the Runs portion of the Pipeline History view, by clicking on the row of any run in the list
It can also be invoked through the pipeline diagram, by clicking on a step and then clicking "View Logs".
Either procedure will result in the Pipeline Log view for the selected run:
You can view log data for each of the steps in the pipeline. You can select the step by either:
- Clicking on the step in the pipeline diagram
- Selecting the step in the dropdown list
The Logs tab presents the record of what was executed for each portion of the step, and the system response. The log shows the command line directives issued, with their outputs.
Each section in the log represents a section of the step, and you may expand each section to view the command line output that was recorded. In this way, you can see the specific success or error messages that were returned for each issued command.
Use the Timestamp toggle to view or hide timestamps for the logs. Use the Internal Logs toggle to view or hide detailed, Pipelines-generated logs.
The Tests tab displays, when available, any test report information that was provided for the step through the save_tests utility function.
The Step Info tab provides additional information about the step as it executed in the run.
The Resources tab displays information about the resources used in the step, and their status at the time the step was executed in the run.
Matrix Steplet Logs
When a Matrix step is selected, a disaggregated list of the individual steplets are presented.
|The sequential number of the steplet in the Matrix step.|
|The success or failure of the steplet.|
|Date and time the steplet began execution.|
|The duration of the run of the steplet.|
|The values of the set of matrix environment variables used by the steplet, and the runtime image the steplet was executed in.|
|The test reports of the steplet, if any.|
|The coverage reports of the steplet, if any.|
Click on a row to view the logs for that steplet.