View Source

Overview

The DockerBuild native step performs a build to produce a Docker image from a Dockerfile in a GitRepo source repository resource .

In the step configuration, you must provide the name (dockerFileName) and directory (dockerFileLocation) of the that contains the command to be processed by a docker build command, as well as the name (dockerImageName) and tag (dockerImageTag) of the resulting image. The image is built on the build node, and information about that image is stored in the run state.

To build a Docker image that relies on a private base image:

Define the base image as an Image resource, with autoPull set to true.
Specify the Image resource as one of the inputResources of the DockerBuild step.

To include artifacts in the Docker image that are not part of the GitRepo source repository:

Define a FileSpec resource that specifies the files to include from Artifactory.
Specify the FileSpec resource as one of the inputResources of the DockerBuild step.

DockerBuild and DockerPush steps must be assigned to the same affinityGroup to share state. If this is not done, the output of DockerBuild will not be available for DockerPush. For more information on using affinityGroup, see Running multiple steps on the same build node.

YAML Schema

The YAML schema for DockerBuild native step is as follows:

pipelines: 
  - name: <string>
    steps:
      - name: <string>
        type: DockerBuild
        configuration:
          #inherits from bash
          affinityGroup:       <string>
          dockerFileLocation:  <string>
          dockerFileName:      <string>
          dockerImageName:     <string>
          dockerImageTag:      <string>
          dockerOptions:       <string>

          integrations:
            - name:            <artifactory integration>  # required

          inputResources:
            - name:             <GitRepo resource>        # required, git repository containing your Dockerfile
            - name:             <Image resource>          # optional base image
            - name:             <FileSpec resource>       # optional

        execution:
          onStart:
            - echo "Preparing for work..."
          onSuccess:
            - echo "Job well done!"
          onFailure:
            - echo "uh oh, something went wrong"
          onComplete: #always
            - echo "Cleaning up some stuff"

Examples

The following examples use a GoLang Git repository represented by a GitRepo resource named gosvc_app to create a Docker image that is published to Artifactory. They assume that an Artifactory integration named MyArtifactory has been created, and that the Artifactory instance has a Docker repository mapped to docker.artprod.company.

The following resources declarations support these examples. Not all of these resources are used in all examples.

Resources

resources:
# Application source repository
  - name: gosvc_app
    type: GitRepo
    configuration:
      gitProvider: MyGithub
      path: myuser/myrepo                   # replace with your repository name
      branches:
        include: master

# Docker image in an Artifactory repository
  - name: base_image
    type: Image
    configuration:
      registry: MyArtifactory
      sourceRepository: docker-local        # replace with your repository name
      imageName: docker.artprod.mycompany.com/baseimage
      imageTag: latest
      autoPull: true

# Files in an Artifactory repository
  - name: icon_files
    type: FileSpec
    configuration:
      sourceArtifactory: MyArtifactory
      pattern: my-local-repo/all-my-images/
      target: icons/

Build a Docker image from a source repository

This example builds a Docker image to a Docker registry in Artifactory. The tag for the image is set to the pipeline's run number.

pipelines:
  - name: demo_pipeline
    steps:
      - name: bld_image
        type: DockerBuild
        configuration:
          dockerFileLocation: .
          dockerFileName: Dockerfile
          dockerImageName: docker.artprod.mycompany.com/gosvc    # replace with your fully qualified Docker registry/image name
          dockerImageTag: ${run_number}
          inputResources:
            - name: gosvc_app
          integrations:
            - name: MyArtifactory

Build a Docker image with dockerOptions

This example demonstrates use of the dockerOptions tag to set the build-arg option for the Docker command. An environment variable named build_number_env_variable is dynamically set to the pipeline's run number. The example assumes the environment variable is used in the Dockerfile commands.

pipelines:
  - name: demo_pipeline
    steps:
      - name: bld_image
        type: DockerBuild
        configuration:
          dockerFileLocation: .
          dockerFileName: Dockerfile
          dockerImageName: docker.artprod.mycompany.com/gosvc   # replace with your fully qualified Docker registry/image name
          dockerImageTag: ${run_number}
          dockerOptions: --build-arg build_number_env_variable=${run_number}           
          inputResources:
            - name: gosvc_app
          integrations:
            - name: MyArtifactory

Build a Docker image with a private base image

This example builds a Docker image that relies on a private base image stored in an Artifactory Docker repository.

pipelines:
  - name: demo_pipeline
    steps:
      - name: bld_image
        type: DockerBuild
        configuration:
          dockerFileLocation: .
          dockerFileName: Dockerfile
          dockerImageName: docker.artprod.mycompany.com/gosvc       # replace with your fully qualified Docker registry/image name
          dockerImageTag: ${run_number}
          inputResources:
            - name: gosvc_app
            - name: base_image
          integrations:
            - name: MyArtifactory

Build a Docker image with files outside the current path

This example demonstrates building a Docker image that includes files outside of the current path. It pulls icon files stored in an Artifactory repository for integration art named my-local-repo. It is assumed that the Dockerfile has a command that will include the files in /icons into the image.

pipelines:
  - name: demo_pipeline
    steps:
      - name: bld_image
        type: DockerBuild
        configuration:
          dockerFileLocation: .
          dockerFileName: Dockerfile
          dockerImageName: docker.artprod.mycompany.com/gosvc         # replace with your fully qualified Docker registry/image name
          dockerImageTag: ${run_number}
          inputResources:
            - name: gosvc_app
            - name: icon_files
          integrations:
            - name: MyArtifactory

How it Works

When you use the DockerBuild native step in a pipeline, it performs the following functions in the background:

cp (if there is a FileSpec input, copy those files to the root of the cloned GitRepo input)
docker build
add_run_variables (add several variables that are later used when pushing the Docker image or publishing build info)
jfrog rt build-collect-env (collect environment information to be later published as part of build info)
add_run_files (save information collected for build info)

Tag	Description of usage	Required/Optional
`dockerFileLocation`	Directory containing the Dockerfile, which is the file that has Docker build configuration. This file is also used as the context for the Docker build. The path provided should be relative to the root of the input GitRepo repository. If no location is provided, the default is the root of the GitRepo repository.	Required
`dockerFileName`	Name of the Dockerfile.	Required
`dockerImageName`	The name of the Docker image to create. This can be set using environment variables or triggering a run using parameters.	Required
`dockerImageTag`	The tag for the Docker image to create. This can be set using environment variables or triggering a run using parameters.	Required
`dockerOptions`	Additional options for the command.	Optional

Overview

YAML Schema

Tags

name

type

configuration