Once your licence bucket is created, you will receive an email with a link to a dedicated web page.
For additional information on how you can get your License Buckets, please contact JFrog sales:
This page will display your personalized bucket license information needed when adding your bucket, including the Bucket Identifier, Signed URL and Key.
There are two ways to add your license bucket:
When using a signed URL to download a license bucket, the URL points to a location on JFrog Bintray. Ensure the host running Mission Control is able to connect to URLs prefixed with
Step 4 of the Onboarding Wizard allows you to add your license buckets using an Offline Bucket File or Signed URL and Bucket Key.
Go to the Admin module > Licenses > Bucket Management, and click Add new bucket.
Enter a Name for your bucket, an Offline Bucket File or Signed URL, the Key you received from your JFrog representative, and click Add Bucket.
For more than one license bucket, make sure the URL and Key that you enter correspond to the same Bucket Identifier.
Don’t confuse the bucket Name with the Bucket Identifier. The bucket name is an arbitrary logical name you assign to the bucket. The identifier is a unique identifier assigned to the bucket by JFrog.
Once the license bucket has been loaded into Mission Control, you can attach licenses from it using JFrog CLI.
A bucket report provides a variety of information on usage of licenses in the bucket. To view a bucket report, hover over a bucket and select View Report from the Actions drop down menu.
|The total number of licenses in this bucket.|
|The identifier of this license bucket.|
|The expiry date for this license bucket.|
Max. consumed licenses
|The maximum number of licenses that were ever in use concurrently during the validity period of this bucket.|
The additional buckets split from this original bucket.
|The services attached to this license bucket.|
Do you have enough or too many licenses in your bucket?
Max. Consumed Licenses shows you that highest number licenses you ever used during the validity period of this bucket. This is something to consider when you renew your JFrog Artifactory licenses.
A license bucket can be split into any number of separate buckets that can be applied to multiple environments as needed.
This is useful for isolated environments that have disconnected networks, and each require a separate Mission Control service. For example: separate environments for Development, Staging and Production. In this case you would split the bucket into additional sub-buckets that can be assigned to each Mission Control service that's within each one of the environments in your organization.
To Split a bucket, select "Split" from the action drop down list.
Add the new bucket name and the number of licenses to assign to it.
Once the new bucket is created, it will be added below the original bucket with the same name, appended by a dash and an ordered number.
The newly created licences bucket should be downloaded and uploaded to the Mission Control environment it is intended for.
To download the split license bucket, hover over the bucket and select Download Bucket and Copy Key from the from the Actions drop down menu.
To remove a license bucket, go to Admin > Licenses > Bucket Management, hover over a specific bucket and select Delete from the Actions drop down.
Once the license bucket is removed, the services that were attached to it should be assigned to a new bucket.
Using license buckets and JFrog CLI, you can easily automate, and therefore greatly simplify, managing licenses for a large number of Artifactory services.
JFrog CLI is a compact and smart client that provides a simple interface to JFrog Mission Control (through its REST API). It can be used by your automation environment for fully automated license management for all your Artifactory services through Mission Control. For details on downloading and installing JFrog CLI, please refer to the JFrog CLI documentation.
While each Artifactory license can only activate one Artifactory service at a time, you are free to move any license around to different Artifactory services as long as the license remains valid. For example, you can temporarily attach a license from a bucket to an Artifactory service used for a specific development project. Once the project is complete and the Artifactory service is no longer needed, you can detach the license and return it to the bucket managed by Mission Control.
You can attach and detach licenses with the JFrog CLI.
attach-lic command extracts a license from the bucket specified and attaches it to the specified Artifactory service.
detach-lic command removes the specified license from the specified Artifactory service and returns it to the specified bucket in JFrog Mission Control.
A license always belongs to the same bucket
When you detach a license, it is always returned to the same bucket it was attached from.
From version 5.0 of JFrog Artifactory, licensing for all cluster nodes in an Artifactory High Availability configuration are managed through the Cluster License Manager. When attaching or detaching licenses to an HA cluster, Mission Control will detect the Artifactory version and work accordingly with the Cluster License Manager if the version is 5.0 or above, or directly with each node for earlier versions of Artifactory.
There are four steps to applying licenses:
You may update the license of several Artifactory services at a time by matching the service with its corresponding license key, and applying all the license keys in a single bulk operation.
To enter or update an Artifactory license, go to Admin, select Licenses > Update license.
Select one or more service for which you want to add or update a license, and click Continue.
Paste the license keys you want to apply to your Artifactory services to the Add Licenses entry field, click Add Licenses and Continue.
You can add licenses one at a time, or paste several licenses, separated by an empty line, into the Add Licenses field and add them to the list at once.
To match up the Artifactory services you have selected with the licenses you have added, first select an Artifactory service. This will enable the list of licenses.
Then, select the license you wish to apply to the selected service and click "Add".
The column on the right displays your matched selections.
To change services and licenses matches, click Delete to return the service and license of a matched set to their respective lists.
Once you have matched all of your Artifactory services with their licenses, click Continue to move on to the next step.
The Summary screen displays the Artifactory services that should be updated with the licenses you selected for them.
To apply the licenses click Execute All.
If, for any reason, applying a license does not work in any of the Artifactory services, you can click the corresponding Retry button to try again.
However, once a licenses is applied, you cannot roll back to the previous licenses.
To apply licenses to a single Artifactory instance use the following steps:
1. Add a new bucket
2. Select Edit service for an existing Artifactory or Edge service
3. In the credentials section, enter username/password and select Test Connectivity. If the connectivity test succeeds, the dropdown for bucket selection is enabled.
4. Choose the new bucket from the list and select Save.
Mission Control will determine the number of licenses the selected Artifactory/Edge instance requires and deploys that many licenses. If the existing licenses have better expiry than the selected bucket, then no action is taken.
Note: For Artifactory and Artifactory Edge services, buckets of both types are available for selection. This allows you to switch an Artifactory to Artifactory Edge or vice versa.